The Failover and Load Balancing settings are described below: •. Enable Load Balancing —This option must be enabled for the user to access the LB Groups and LB Statistics section of the Failover & Load Balancing configuration. If disabled, no options for Failover & Load Balancing are.
12/3/2020 · Configuring firewall rules. This example uses the following firewall rules: fw-allow- lb -subnet: An ingress rule, applicable to all targets in the VPC network, allowing traffic from sources in the 10.1.2.0/24 range. This rules allows incoming traffic from any source within the lb -subnet to the instances (VMs) being load balanced.. fw-allow-ssh: An ingress rule applied to the instances being …
1. Expand the Network tree and click WAN Failover & LB. The WAN Failover & LB page displays. 2. Select Enable Load Balancing. 3. Select the secondary interface (s) from the Secondary WAN Interface pull-down menu. If this is not configured, you need to configure a WAN interface from the.
Default LB Group: Basic Failover : Default LB Group IPv6: Basic Failover : Statistics. Display Statistics for: Clear …
Methods Failover . This example explains how to use multiple gateways with one taking over when first fails. It begins with adding the gateways. Set bigger distance value for the secondary one, and check-gateway for the first one: /ip route add gateway=192.168.1.1 check-gateway=ping /ip route add gateway=192.168.2.1 distance=2, Network > Failover & Load Balancing – SonicWall, Network > Failover & Load Balancing – SonicWall, WAN Failover and Load Balancing – SonicWall
